Westfield MK80-61 » Red Power Team, Iowa
x
x
Red Power Team, Iowa
Case IH
Red Power Team, Iowa
Bancroft
515.885.2319
312 West Ramsey St.
Bancroft, IA 50517
Call Us Directions
Corwith
515.583.2364
301 1st Street
Corwith, IA 50430
Call Us Directions
Estherville
712.362.3596
2703 Murray Rd.
Estherville, IA 51334
Call Us Directions
Greene
641.823.4154
3080 Hwy 14
Greene, IA 50636
Call Us Directions
Humboldt
515.332.1702
2050 13th Street North
Humboldt, IA 50548
Call Us Directions
Mason City
641.424.2702
10997 265th St
Mason City, IA 50401
Call Us Directions
Manson
712.469.2145
221 Eighth Street
Manson, IA 50563
Call Us Directions
New Hampton
641.394.3178
2205 240th Street
New Hampton, IA 50659
Call Us Directions
Spencer
712.262.2933
3695 Hwy 71
Spencer, IA 51301
Call Us Directions
West Bend
515.887.7781
101 - 130th St
West Bend, IA 50597
Call Us Directions

Westfield MK80-61

Product Lines / All Other Lines / Westfield / Portable Augers / MK 80 Auger / MK80-61
Westfield MK80-61 for sale at Red Power Team, Iowa

Double tap to zoom

Westfield MK80-61 for sale at Red Power Team, Iowa

 

Features

Wear Edge Technology™
Westfied developed Wear Edge Technology™ to extend the life of the flighting. This provides an extra layer of steel welded to the edge on critical wear points. As a result, flighting lasts longer and needs to be replaced less often – saving time and money.

  • 8" diameter 
  • 51' - 71' lengths 
  • up to 3,900 bph

 

Powder Coat Paint
Westfield uses a durable powder coat paint for a strong, long lasting finish that looks good and protects against rust.

A-Frame Undercarriage
The MK80 Series features an A-frame undercarriage to withstand bowing and maintain rigid alignment during heavy loads.

Optional Features

  • Hydraulic power swing
  • Flex spouts
  • Right angle drive
  • Reverser kit

Specs

MODEL MK80-61
TUBING GAUGE 14 GA Welded Steel
MAIN FLIGHTING 10 GA Stretched & Welded
WEAR EDGE TM
(REINFORCED FLIGHT)"		 10 GA Ribbon Welded Wear EdgeTM on Critical Grain Transfer Points including the Intake Hopper Flighting, Initial Incline Flighting & Boot Flighting
FLIGHTING SHAFT 1.66" x 11 GA Tubing
PSI REQUIRED TO RAISE AUGER 950 PSI
PTO LINE DRIVE 14 Series with 5/16" Shear Bolt
HP REQUIRED 45
TUBE TRUSSING 5/16" Aircraft Type Galvanized Cable
TRACK High Yield 11 GA Roll Formed
TRACK SHOE Double 2 ¾" Rollers
UNDERCARRIAGE 3" x 11 GA Frame
AXLE 2 ½" x 2 ½" x 1/8" Wall Square Tubing
HUBS & WHEELS 4 Bolt Agricultural Type Hubs - 15" Wheels
WHEEL TREAD 112"
HYDRAULIC LIFT One 4" Cylinder with 5/16" Aicraft Cable
TRANSPORT HEIGHT 13' 6"
TIRES REQUIRED 15" Agricultural Tires
*STANDARD HOPPER HEIGHT 10 ½"
APPROXIMATE HYDRAULIC FLUID
REQUIRED TO RAISE AUGER		 7.5 Litres
*Hopper height is to top of metal portion (add 4"" for the rubber extension).

Note: Capacities may vary according to the commodity and moisture content. Specifications and design are subject to change without notice." 

DISCLAIMER: This auger was proudly designed to handle dry, free-flowing grains up to a maximum of 65 lb/bu (52 lb/cf). Any usage of this auger outside of this is not authorized by AGI.