Features
Recutter Bar
The Bad Ax uses a recutter bar along with stationary counter teeth to hold material in place while it is being mulched. This unique design allows the Bad Ax to cut material into finer particles for faster decomposition and produce a nicer looking end product. It also helps avoid log jams in the chamber, which can be extremely difficult to remove in competitive units.
60-Inch Diameter, Fully Machined Disc
The Bad Ax can cut down trees up to 14 inches in diameter using a 60-inch diameter disc. The fully machined disc is 1.25 inches thick using premium-strength steel, and it contains no welds, so there are no points subject to stress cracking. Additionally, the bolt-on mounts can be replaced in the field without the need for cutting, welding or rebalancing the rotor.
The large Bad Ax disc builds up its own inertia during use, pushing its productive force beyond the maximum hydraulic horsepower. This helps it more quickly gather and process vegetation.
Direct Drive
The hydraulic motor is directly mounted to the disc, providing 100 percent of its power to the job at hand, and eliminating the need for high-maintenance pulleys or belts.
Bolt-On Teeth
Quadco teeth are attached to the mulching disc using bolt-on mounts. These make the teeth easy to rotate, replace and remove while on the jobsite. The teeth have four cutting surfaces, allowing them to be rotated four times before sharpening is needed.
Quadco Blades
Reversible with ultra-sharp, heat-treated steel knife edges, the Quadco blades effortlessly slice through trees and vegetation, as opposed to shredding and tearing. They can be rotated on site for a fresh cutting edge, or sharpened to maintain efficiency.
Deflector
The discharge deflector directs material down and away from the machine, helping to protect the equipment and operator. Unlike competitive hinged designs, the Bad Ax uses a rigid deflector and angled recutter bar for better control of the discharge.
Housing Design
The sides of the Bad Ax housing are parallel. This design provides optimal control when compared with funnel, or V-shaped, disc mulchers, which can be easily misdirected when hooking onto stumps or other solid objects.
Motor
The Bad Ax uses an instant torque radial piston high-pressure motor for maximum performance. It requires 70-120 hydraulic horsepower (hydraulic horsepower = GPM X PSI / 1714) and 36-50 GPM up to 5,000 PSI.
Ground-Level Mulching
The front of the Bad Ax housing is angled, allowing the teeth to mulch at ground level.
Adjustable Tree-Pusher Bar
Featuring welded claw hooks, the bar is used to push falling trees away from the power unit and to position material for proper feeding into the mulching disc. Unlike many other disc mulchers, the pusher bar on the Bad Ax can be adjusted to meet the needs of the jobsite.
Anti-Wrap Bearing Protection
A precise labyrinth ring design helps keep debris from entering the bearing chamber.
Instrumentation
A rubber-mounted pressure gauge allows the operator to easily monitor the workload from the skid steer cab.
Anti-Cavitation Shutdown Circuit
An integrated anti-cavitation shutdown circuit protects motor during shutdown.
Heavy-Duty Construction
The entire Bad Ax body and disc are constructed of premium high-strength steel for maximum durability
Universal Skid-Steer Mount
The disc mulcher easily pairs with a wide variety of skid steer brands and models.
Specs
Model | 60BA |
---|---|
Cutting Width | 60” (1.52 m) |
Overall Width | 67” (1.70 m) |
Number of Teeth | 44 |
Weight | 2,643 LBS (1,198.8 kg) |
Crated Weight | 2,793 LBS (1,266.9 kg) |
Auxiliary Hydraulic Flow (Up To 5,000 PSI) | 36-50 GPM |
Hydraulic Horsepower Range | 70-120 |
Radial Piston Motor Max Hydraulic Pressure | 5,000 PSI |
Disc Speed | 1,1-0 RPM/200+ MPH (321.9 kph) Tip Speed |
-
Bancroft Implement, Inc.
312 West Ramsey St.
Bancroft, IA 50517
515.885.2319
Get Directions -
Corwith Red Power
301 1st Street
Corwith, IA 50430
515.583.2364
Get Directions -
Estherville Red Power
2703 Murray Rd.
Estherville, IA 51334
712.362.3596
Get Directions -
McRoberts Red Power
3080 Hwy 14
Greene, IA 50636
641.823.4154
Get Directions -
Humboldt Red Power
2050 13th Street North
Humboldt, IA 50548
515.332.1702
Get Directions -
Mason City Red Power
10997 265th St
Mason City, IA 50401
641.424.2702
Get Directions -
Manson Red Power
221 Eighth Street
Manson, IA 50563
712.469.2145
Get Directions -
New Hampton Red Power
2205 240th Street
New Hampton, IA 50659
641.394.3178
Get Directions -
Spencer Red Power
3695 Hwy 71
Spencer, IA 51301
712.262.2933
Get Directions -
West Bend Red Power
101 - 130th St
West Bend, IA 50597
515.887.7781
Get Directions
Red Power Team © 2024 Site by R.A | EquipmentLocator.com