Loftness 8-Ton Fertilizer Spreader

VARIABLE RATE READY

The F810 comes standard with a hydraulic apron drive and Raven 37-pin plug (other harness types are available), making it variable rate ready. This allows the operator to increase or decrease the fertilizer feed rate on the go. A prescription load rate can also be written into the monitor to control how much fertilizer should be applied to each part of the field. If one area needs more nitrogen than another, for instance, the fertilizer rate will adjust automatically according to the GPS position.

DUAL STAINLESS-STEEL SPINNERS

20-Inch dual stainless-steel spinners produce a consistent spread pattern from 40 to 90 feet wide.

CONTROLLED SPINNER DRIVE

The controlled spinner drive works in conjunction with a speed sensor, allowing the operator to set the desired spinner speed from the cab to match the desired spread width. Simply enter the desired spinner speed, and the spinners will adjust automatically to the programmed speed.

40-INCH FRAME CLEARANCE

A 40-inch frame clearance allows the spreader to be used for in-season applications in row crops.

80- TO 150-INCH ROW SPACING

Wheel spacing is adjustable from 80 to 150 inches to accommodate a variety of row crop spacings. Other wheel and spacing options are available.

OBSTRUCTION-FREE INTERIOR

The stainless-steel hopper is smooth with a 35-degree slope, minimal flat surfaces and no internal gussets or plates to accumulate fertilizer. This results in a much cleaner system that maximizes material flow and helps prevent corrosion.

ADJUSTABLE HITCH

The hitch has a moveable clevis to accommodate a wider range of drawbar heights, and allows for leveling of the spreader. The hitch is also integral to the frame, while the suspension pulls from the hitch to lower the amount of frame stress.

INTEGRAL LIGHTS

Lights are included for maximum safety.