HayBuster CMF-710

MIXING CAPACITY
The CMF-710 has a 710 Cu. Ft. mixing capacity with the standard extension.

ADJUSTABLE VERTICAL KNIVES
Adjustable vertical knives for more aggressive cutting.

OBSERVATION WINDOWS
The CMF-710 has observation windows on the right and left sides of the machine.

LARGE 30 INCH BY 40 INCH UNLOADING DOOR
Large 30 inch by 40 inch unloading door for fast even unloading and cleaning.

VERSATILE 36 IN. WIDE CROSS AND UNLOADING CONVEYOR
The CMF-710 is equipped with a 36 inch wide hydraulic chain/slat unloading conveyor featuring:

• Cross Conveyor only with right or left hand drives.
• Cross Conveyor with spouts or endgates. Magnets are available for the spouts.
• Cross Conveyor with hydraulic conveyor extension.

Available in right hand, left hand, or both right and left hand unload. The dual discharge unit can only unload from one side at one time. Spouts and optional magnets are also available. 
18-5/8 in. to 47 in. discharge height 

76" HEAVY DUTY TWIN AUGERS W/7 KNIVES PER AUGER
Heavy duty 76 inch twin screw augers, with self sharpening serrated knives, driven by 2 HD USA gearboxes that are covered by a two year warranty.

DIGI-STAR 4PT SCALE WITH CHOICE OF OPTIONAL DIGI-STAR MONITORS
A CMF-710 equipped with the standard Digi-Star 4pt. scale and EZ 3500 V monitor. All other Digi-Star monitors and scale heads are available. The Digi-Star system is powered by a standard on-board 12 volt battery. Digi-Star feeding programs are also available.

FREE MOTION CLUTCHES ON DRIVE-LINE
Free motion clutches on drive-line protect the heavy duty gearboxes. Gearboxes come with a two-year warranty. The optional two speed gearbox is used for loaded startups and heavy rations.

4 POINT SCALE
4 point scale for accurate weighing, with reduced scale bounce during loading and feeding.

OSCILLATING HEAVY DUTY AXLES
Oscillating Heavy Duty Axles with 4) 315/80 R 22.5 20 ply rated tires provide even weight distribution on uneven and frozen ground.

HEAVY DUTY FRAME 
The CMF-710 is built with a Heavy Duty 6" X 9" X 1/4" steel tube frame for strength and longevity.

OPTIONAL MAGNETS ON CHUTES
Discharge magnets on the discharge chutes removes metal, such as bale wire, from feed, providing the highest quality feed available.

DOGLEG CONVEYOR
Optional Dogleg Conveyor Available.

CV PTO OR OPTIONAL 2-SPEED GEAR BOX
The CMF-710 comes equipped with either a Heavy Duty Constant velocity PTO or an optional 2-Speed Gear box. The two speed gearbox is used for loaded startups and heavy rations.