H&S 7227 Super Duty

Double tap to zoom

The 7200 Series Forage Boxes are available in 23’, 25’ & 27’ models with front & rear unload systems.
The Electric-Over-Hydraulic “Super Duty” features Hydraulic valves with a variable Speed High/Low Main Apron Unload System and Control Box.
(1) Remote is needed for the Front Unload System (Hoses included are changed when using either the front, or rear unload systems)
(1) Remote is needed for the Rear Unload System
The system allows you to start and clear the cross conveyor before you start the beaters or main apron conveyors.
No Belts or Pulleys.
H&S uses three – 18″ 4 bar H.D. spiral type beaters – not augers. Aggressive in handling tough material, they are even feeding.
Beater shafts are 1¾″ equipped with greaseable bearings and are mounted in the head, not auxiliary panels in the box.
7200 Series Forage Box frames feature heavy 5″ channel cross members and 2.5″ x 2.5″ side stakes.
On the rear unload system, once the tailgate safety lock is released, the self-locking mechanism unlocks automatically while unloading and locks shut when the tailgate closes.
A 24″ Hydraulic-Fold Extend/Retract Cross-Conveyor Extension is standard on all 7200 Series Models.
2″ Stress-proof Front Drive Shaft.
2″ Stress-proof Rear Drive Shaft. (Front & Rear Unload Models).
Heavy Duty Gearbox System.
Heavy Drive Chains.
Spring Loaded Tighteners on Beaters.
Quick Release Cross-Conveyor Clean Out Pan.
The Rear Unload Drive System features a quick change pin.
A 4th beater is optional.

7227 "SUPER DUTY"
Inside Width	88.25″
Inside Height (floor to top of side)	86″
Inside Length	27′
Overall Width w/Extension	109″
Overall Length	31′ 6″
Box Side Height	106″
Overall Height @ Top Door Pivot	122″
Cubic Ft. Cap. - No Roof/Struck	1,406.08 cu. ft.
Apron Chain	667XH
Cross-Conveyor	22″ Wide - CA550 Chain w/Welded Slats
Beaters	3 - 18″ - 4 Bar Spiral Beaters w/1¾″ Greaseable Bearings
Drive	Electric-over-Hyd. System w/Variable Speed High/Low Main Apron Unload System and Elec. Control Box
Cross-Conveyor Extension	24″ Hydraulic-Fold Extend/Retract
Emergency Stop Clutch	Standard
Rear Unload Drive	Hydraulic
Rear Unload Speed	Unload Time is dependent on Tractor RPM, Hydraulic Pressure & GPM
Rear Endgate	Automatic Lock & Unlock
Rear Gate Delay	Standard
Roof	N/A

7200 SERIES 7227 Super Duty