Farm King 3633

Double tap to zoom

Cutting wheel design provides a smoother cutting action and higher productivity
Durable carbide-tipped cutting teeth are economical and easy to replace
Stabilizer bar provides solid footing during operation
Maneuverable – goes anywhere a tractor or skid steer can; gets into tight places
Easy to operate – hydraulic controls allow easy operation from the seat of the power unit using existing hydraulic controls
Hardened bushings and grease zerks used at major pivot points for increased reliability and extended service life
Standard pressure relief valve for precise control of cutting feed rate
Rubber deflector helps control chips and debris during grinding
Parking stand for easy storage

Model	3633
Hitch	Cat. I / II
Overall length	80"
Drive system protection	Slip clutch
Gearbox rating / ratio	100 hp / 1:1.46
Cutting wheel construction	Welded 2 piece laminated steel
Cutting wheel thickness	3/4"
Cutting wheel diameter	36"
Cutting wheel speed @540 PTO RPM	788 RPM 7,430 ft/min
Number of teeth	42
Cutting teeth construction	Carbide steel bolt in
Cut height above ground	18"
Cut depth below ground	15"
Max. cut depth per pass	8"
Max. horizontal cut	33"
Swing arc	45°
Min. power / flow required	45 PTO hp
Max. power / flow	100 PTO hp
Drive system	PTO / Series 6
PTO speed	540 RPM
Weight	880 lbs

Stump Grinder 3633